![]() ![]() Step down distance, as used in this section, means the actual distance between the bottom of the required opening and a usable foot hold, extending out from the fuselage, that is large enough to be effective without searching by sight or feel. This type is a floor-level exit with a rectangular opening of not less than 30 inches wide by 48 inches high, with corner radii not greater than 10 inches. This type is a floor-level exit with a rectangular opening of not less than 32 inches wide by 72 inches high, with corner radii not greater than six inches. This type is a floor-level exit with a rectangular opening of not less than 42 inches wide by 72 inches high, with corner radii not greater than seven inches. The means of opening the tailcone must be simple and obvious and must employ a single operation. This type is an aft exit from the passenger compartment through the pressure shell and through an openable cone of the fuselage aft of the pressure shell. The dimensions and physical configuration of this type of exit must allow at least the same rate of egress as a Type I exit with the airplane in the normal ground attitude, with landing gear extended. This type is an exit from the passenger compartment through the pressure shell and the bottom fuselage skin. This type is a rectangular opening of not less than 19 inches wide by 26 inches high, with corner radii not greater than 6.3 inches, located over the wing, with a step-up inside the airplane of not more than 29 inches and a step-down outside the airplane of not more than 36 inches. If the exit is located over the wing, the step-down outside the airplane may not exceed 27 inches. This type is a rectangular opening of not less than 20 inches wide by 36 inches high with corner radii not greater than seven inches, and with a step-up inside the airplane of not more than 20 inches. Type II exits must be floor-level exits unless located over the wing, in which case they must not have a step-up inside the airplane of more than 10 inches nor a step-down outside the airplane of more than 17 inches. This type is a rectangular opening of not less than 20 inches wide by 44 inches high, with corner radii not greater than seven inches. ![]() This type is a floor-level exit with a rectangular opening of not less than 24 inches wide by 48 inches high, with corner radii not greater than eight inches. ![]() For the purpose of this part, the types of exits are defined as follows: Over 20 percent of all inpatient admissions begin in our Emergency Department.(a) Type. Imaging Services (x-ray, CT and Ultrasound) are adjacent to the department.įor many patients, the Emergency Department represents a patient’s and their families’ first impression of Cleveland Clinic. The Department is a leader in the use of an ED-based observation unit for the evaluation and treatment of patients with conditions that require more extended testing or treatment than can be done in the Emergency Department. Our experienced physicians are dedicated to providing high quality, patient centered care.Īs part of the Maria and Sam Miller Emergency Services Building, the ED consists of 75 treatment rooms/spaces, including a split flow (fast-track) area open 9 a.m. Caregivers treat over 61,000 adult and pediatric patients annually, providing a critical link to healthcare for our community, the region and the world (through Cleveland Clinic Critical Care Transport). Our Main Campus Emergency Department (ED) provides care to patients 24 hours per day, seven days per week and is staffed by specialists in Emergency Medicine. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |